Corian® for Kitchen Worktops

[1 Cup]

Your corners are great .Will need to order polisher but can't find duel Action Buffer ?

Dual Action Car Polisher Orbital Polishing Machine DA Buffer Sander & 6" Wax Pad

For DeWalt 18/20V Battery 3-Speed Adjustable Electric Polisher Brushed Sander UK | eBay

Cordless Leaf Blower for Dewalt 20V Battery 2-in-1 Electric Leaf Blower&Vacuum. Spray Gun Cordless Fence Wall Paint Sprayer Electric Airless HVLP For DeWalt 18V. Cordless Paint Sprayer 1000ML Electric Spray Gun for Dewalt 8V 20V Battery UK.

www.ebay.co.uk

5PCS 7" 180MM CAR POLISHER PAD BUFFER WAXING BUFFING POLISHING SPONGE PADS KIT | eBay

Simply stick the pads to the backing plate of polisher for installation and remove from it for replacing. Material: Sponge. Easy to install and replace with hook and loop velcro backing that works with universal polishers.

www.ebay.co.uk

DEWALT DT3568 180MM HOOK & LOOP WOOL POLISHING BONNET FOR DWP849X POLISHER | eBay

DT3568 180MM WOOL POLISHING BONNET. VELCRO FASTENING FOR THE DWP849X POLISHER. GENUINE DEWALT.

www.ebay.co.uk

DEWALT N081419 REPLACEMENT PAD FOR DCM849 DWP849X VARIABLE SPEED POLISHERS | eBay

PART NO N081419. M14 X 2 THREAD.

www.ebay.co.uk

Milwaukee Polishing Machine | eBay

<p dir="ltr" style="margin-top:0; margin-bottom:0;">Is new, I used it may be 5 times. Comes with 3m pad.</p>

www.ebay.co.uk

DeWALT N649086 DCM848 125mm 5" hook & loop polisher pad | eBay

PART NO N649086. VELCRO HOOK AND LOOP FASTENING.

www.ebay.co.uk

Dewalt Buffing Pad Medium Cut Polish Polishing Green 150mm x 2 | eBay

5 Inch Medium Cut V Line Premium Car Polish Buffing Polishing Pad Green 150mm.

www.ebay.co.uk

DEWALT DT3622 178MM POLISHING BONNET | eBay

DT6822 178MM POLISHING BONNET. GENUINE DEWALT. AB, BT, HS, FK, GY, IM, IV, J, KA, KW, PA, PH, TR, ZE.

www.ebay.co.uk

Makute CP001 1300W 240V 180mm 7'' Paint Polisher Variable Speed | eBay

Makute CP001 Polisher. 600-3000 RPM.

www.ebay.co.uk

 

[1 Cup]

I'm glad you done it . Lol

This is the one do you think 16 @ 240 is man enough for air fryer ?

https://www.amazon.co.uk/dp/B0CKWWMF3D?m=AXDDAL5E4J6U7&ref=clp_pc_a_A34Q3YPNWST80O

[/QUOTE]

 

[1 Cup]

This is now getting better ! Thanks

https://www.tlc-direct.co.uk/Images/Products/size_3/KBSK003.JPG

 

[st3v3]

Any of the machines will work, DA just makes it easier I guess. Less likely to over-polish an area, you just need to keep it moving.

I'd go for TLC socket over the Chinese random on amazon.

 

[1 Cup]

Back to work top

Got these ankor things to hold down / underneath sink. Came with butterfly wing nuts . But found out today there not M6 threads similar but not the same.

So the riv nuts and Thurlst one that I got for legs x10 don't work as the fixings are M6.

So now new plane fix with butterfly/ wing nut.

 

[1 Cup]

This is them all done / legs ! Still need glueing down and will make it as flat as possible.

Thinking hot glue and or silican ?

So back to sanding down

 

[n brown]

neither silicone nor hot glue . maybe stixall

 

[st3v3]

I doubt hot glue will be any good, it will be set by the time you get around all of the legs...

Stixall is a good shout

 

[1 Cup]

So out to shops , proper job £50.got a few bits for sanding and Polishing top.

100 150 240 what dose this mean ?
Why is everything wet and dry ! Take back if no good.
Trying it befor food last night.
100 took saw blade marks off edges but not deep digs. So at the spare bit again today, [

ATTACH=full]130937[/ATTACH]

 

[1 Cup]

Went out to sand it down 100 150 240 and it looked bad unless wet !. Opened pack that said extra fine = 600. But can't see any improvement.
Well the edges and corners look better. So last thing I did today was 1500 wet sanding what a mess. Both me and top.
These are the sandpaper .

Tried it on the drill

.

 

[1 Cup]

Got dinks out and most scratches out, but it was bad.
So put it on wood. A must watch . Upload ed video but not formated/

 

[1 Cup]

 

[1 Cup]

No phone vid accepted

 

[st3v3]

Use small numbers first then the bigger numbers.

 

[n brown]

if a router cuts it ok, i'd do the outer edge again with a template guide